HP ENVY 14-2161se HP ENVY 14 Notebook PC - Maintenance and Service Guide - Page 58
Release the power button board cable, and keyboard light cable are accessible.
View all HP ENVY 14-2161se manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
2. Remove the four Phillips PM2.0×3.92 screws that secure the top cover to the computer in the battery bay. 3. Turn the computer right side up, with the front toward you. 4. Open the computer as far as it will open. 5. Lift the front edge of top cover (1) until the TouchPad cable is accessible. 6. Release the ZIF connector to which the TouchPad cable is attached, and then disconnect the cable (2) from the system board. 7. Slide the top cover (1) forward until the power button board cable, keyboard cable, and keyboard light cable are accessible. 8. Release the power button board cable (2) from the fan surface. (The power button board cable is attached to the fan surface with double-sided tape.) 9. Disconnect the power button board cable (3) from the system board. 10. Release the ZIF connector to which the keyboard light cable is attached, and then disconnect the cable (4) from the system board. 50 Chapter 4 Removal and replacement procedures