HP ENVY 14-3090ca HP ENVY14 SPECTRE Maintenance and Service Guide IMPORTANT! T - Page 73
Display assembly, Remove the Card Reader board cable see
View all HP ENVY 14-3090ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
2. Remove the hinge covers (2) from the base enclosure. Reverse this procedure to install the hinge covers. Display assembly Description Display assembly, 14.0-in, AntiGlare, high-definition (includes display panel cable, 2 WLAN antenna transceivers and cables, and webcam/microphone module and cable) Spare part number 675507-001 Before removing the display assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 32). 5. Remove the solid-state drive connector board cable (see Solid-state drive on page 34). 6. Remove the Card Reader board cable (see Card Reader board cable on page 36). 7. Remove the top cover (see Top cover on page 39). 8. Disconnect the wireless antenna cables from the wireless audio module (see Wireless audio module on page 50). Component replacement procedures 65