HP ENVY 14-u200 ENVY 14 Notebook PC Maintenance and Service Guide - Page 66
RTC battery, Power connector cable see
View all HP ENVY 14-u200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
RTC battery Description RTC battery Spare part number 697917-001 Before removing the RTC battery, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 31), and then remove the following components: a. Optical drive (see Optical drive on page 32) b. Top cover (see Top cover on page 39) c. Power connector cable (see Power connector cable on page 63) d. System board (see System board on page 52) Remove the RTC battery: 1. Turn the system board upside down, with the front toward you. 2. Use a flat-bladed, non-metallic tool (1) to release the RTC battery from the socket on the system board. The battery is spring loaded and will pop up. 3. Remove the RTC battery (2). Reverse this procedure to install the RTC battery. When installing the RTC battery, make sure the "+" sign faces up. 56 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts