HP ENVY 14-u200 ENVY 14 Notebook PC Maintenance and Service Guide - Page 69
Remove the fan, Reverse this procedure to install the fan.
View all HP ENVY 14-u200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Remove the fan: 1. Turn the system board upside down, with the front toward you. 2. Disconnect the fan cable (1) from the system board. 3. Remove the Phillips P2.5x4.0 screw (2) that secures the fan to the system board. 4. Remove the fan (3) from the system board. Reverse this procedure to install the fan. Component replacement procedures 59
Remove the fan:
1.
Turn the system board upside down, with the front toward you.
2.
Disconnect the fan cable
(1)
from the system board.
3.
Remove the Phillips P2.5x4.0 screw
(2)
that secures the fan to the system board.
4.
Remove the fan
(3)
from the system board.
Reverse this procedure to install the fan.
Component replacement procedures
59