HP ENVY 15-3217nr HP ENVY 15 - Maintenance and Service Guide - Page 73
TouchPad LED board, Detach the TouchPad LED board
View all HP ENVY 15-3217nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
TouchPad LED board Description TouchPad LED board (includes cable) Spare part number 675232-001 Before removing the TouchPad LED board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 35). 5. Remove the service over (see WLAN module on page 42). 6. Remove the top cover (see Top cover on page 47). Remove the TouchPad LED board: 1. Disconnect the TouchPad LED board cable (1) from the system board. 2. Detach the TouchPad LED board (2) from the base enclosure. (The TouchPad LED board is attached to the base enclosure with double-sided tape). 3. Remove the TouchPad LED board and cable. Reverse this procedure to install the TouchPad LED board and cable. ENWW Component replacement procedures 65