HP ENVY 15-3247nr HP ENVY 15 - Maintenance and Service Guide - Page 45
Hard drive, Remove the hard drive
View all HP ENVY 15-3247nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket, hard drive connector cable, or screws. These components are included in the Hard Drive Hardware Kit, spare part number 668828-001. Description 1-TB, 5400-rpm, 9.5-mm 750-GB, 7200-rpm, 9.5-mm 750-GB, 7200-rpm, 9.5-mm hybrid 500-GB, 7200-rpm, 9.5-mm 320-GB, 7200-rpm, 9.5-mm Spare part number 676521-001 633252-001 684506-001 634925-001 641672-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 35). Remove the hard drive: 1. Disconnect the hard drive connector cable (1) from the system board. 2. Release the hard drive connector cable (2) from the clips built into the base enclosure. ENWW Component replacement procedures 37