HP ENVY 15-3247nr HP ENVY 15 - Maintenance and Service Guide - Page 60
Power button board, and the Phillips PM2.0×2.8 screw
View all HP ENVY 15-3247nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Power button board Description Power button board (includes cable) Spare part number 668836-001 Before removing the power button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 35). 5. Remove the service cover (see WLAN module on page 42). 6. Remove the top cover (see Top cover on page 47). Remove the power button board: 1. Turn the top cover upside down, with the front toward you. 2. Remove the two Phillips PM2.0×2.5 broad head screws (1) and the Phillips PM2.0×2.8 screw (2) that secure the power button board to the top cover. 3. Release the clips (3) built into the top cover that secure the power button board. 4. Release the power button board (4) by lifting the right side of the board. 52 Chapter 4 Removal and replacement procedures ENWW