HP ENVY 15-j185nr HP ENVY 15 Notebook PC and HP ENVY TouchSmart 15 Notebook PC - Page 82
that services it., Clean and then replace the thermal paste used on the processor
View all HP ENVY 15-j185nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
7. Remove the heat sink (2). NOTE: Due to the adhesive quality of the thermal material located between the heat sink and the system board components, it may be necessary to move the heat sink from side to side to detach it. NOTE: The thermal material must be thoroughly cleaned from the surfaces of the heat sink and the system board components each time the heat sink is removed. Replacement thermal material is included with the heat sink, processor, and system board spare part kits. 1. Clean and then replace the thermal paste used on the processor (1) and the heat sink section (2) that services it. 2. If the heat sink has a graphics subsystem chip (3) and the heat sink section (4) that services it, clean and then replace that thermal paste. 72 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts