HP ENVY 15-k016nr HP ENVY 17 Notebook PC HP ENVY 15 Notebook PC - Maintenance - Page 71
TouchPad button board, that secure the TouchPad button board bracket to
View all HP ENVY 15-k016nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
TouchPad button board Description NOTE: Some models have the touchpad button board spared with the top cover. Removal is only required on select models. TouchPad button board (includes cable) for use with HP ENVY 15 Notebook PC computer models TouchPad button board (includes cable) for use with HP ENVY 17 Notebook PC computer models Spare part number 763790-001 763712-001 Before removing the TouchPad button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 42). 5. Remove the optical drive (see Optical drive on page 43). 6. Remove the top cover from the base enclosure (see Base enclosure on page 46). Remove the TouchPad button board: 1. Turn the top cover upside down, with the front toward you. 2. Remove the two broadhead screws (1) that secure the TouchPad button board bracket to the top cover. NOTE: Some models may have three broadhead screws for the TouchPad button board (1). 3. Remove the TouchPad board by carefully pushing the TouchPad down (2) and routing the cable through the opening (3) (the cable was disconnected earlier from the top cover). Component replacement procedures 61