HP ENVY 15-k016nr HP ENVY 17 Notebook PC HP ENVY 15 Notebook PC - Maintenance - Page 73
Subwoofer, Disconnect the cable from the ZIF connector
View all HP ENVY 15-k016nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 42). 5. Remove the optical drive (see Optical drive on page 43). 6. Remove the base enclosure and top cover (see Base enclosure on page 46). Remove the optical drive connector board: ▲ Disconnect the cable from the ZIF connector (1), and then disconnect the optical drive connector (2) from the tabs to remove it. Reverse this procedure to install the optical drive connector board. Subwoofer Description Subwoofer for HP ENVY 17 Notebook PC computer models Subwoofer for HP ENVY 15 Notebook PC computer models Spare part number 763716-001 763788-001 Before removing the subwoofer, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 42). Component replacement procedures 63