HP ENVY 15-k200 Maintenance and Service Guide 1 - Page 81

Memory modules, Turn the computer, with the front edge toward you.

Get HP ENVY 15-k200 PDF manuals and user guides View all HP ENVY 15-k200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 81 highlights

Before removing the speakers, follow these steps: Before removing the Speakers, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 38), 5. Remove the optical drive (see Optical drive on page 39). 6. Remove the top cover from the base enclosure (see Base enclosure on page 42). 7. Remove the WLAN module (see WLAN module on page 56). 8. Remove the subwoofer (see Subwoofer on page 60). 9. Remove the system board (see System board on page 64). Remove the speakers: 1. Turn the computer, with the front edge toward you. 2. Remove the two Phillips screws (1). 3. Disengage the cables, and then remove the front speakers (2). Reverse this procedure to install the speakers. Memory modules Before adding new memory, make sure you update the computer to the latest BIOS. Component replacement procedures 71

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
Before removing the speakers, follow these steps:
Before removing the Speakers, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
38
),
5.
Remove the optical drive (see
Optical drive
on page
39
).
6.
Remove the top cover from the base enclosure (see
Base enclosure
on page
42
).
7.
Remove the WLAN module (see
WLAN module
on page
56
).
8.
Remove the subwoofer (see
Subwoofer
on page
60
).
9.
Remove the system board (see
System board
on page
64
).
Remove the speakers:
1.
Turn the computer, with the front edge toward you.
2.
Remove the two Phillips screws
(1)
.
3.
Disengage the cables, and then remove the front speakers
(2)
.
Reverse this procedure to install the speakers.
Memory modules
Before adding new memory, make sure you update the computer to the latest BIOS.
Component replacement procedures
71