HP ENVY 15-v000 Maintenance and Service Guide 1 - Page 70
Subwoofer, Before removing the optical drive connector board, follow these steps
View all HP ENVY 15-v000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Before removing the optical drive connector board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 38). 5. Remove the optical drive (see Optical drive on page 39). 6. Remove the base enclosure and top cover (see Base enclosure on page 42). Remove the optical drive connector board: ▲ Disconnect the cable from the ZIF connector (1), and then disconnect the optical drive connector (2) from the tabs to remove it. Reverse this procedure to install the optical drive connector board. Subwoofer Description Subwoofer for HP ENVY 17 Notebook PC computer models Subwoofer for HP ENVY 15 Notebook PC computer models Spare part number 763716-001 763788-001 Before removing the subwoofer, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 60 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts