HP ENVY 15-v000 Maintenance and Service Guide 1 - Page 87

Fan, Remove the fan

Get HP ENVY 15-v000 PDF manuals and user guides View all HP ENVY 15-v000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 87 highlights

Fan Description Fan (with foil) Spare part number 763700-001 Before removing the fan, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 38), 5. Remove the optical drive (see Optical drive on page 39). 6. Remove the top cover from the base enclosure (see Base enclosure on page 42). 7. Remove the WLAN module (see WLAN module on page 56). 8. Remove the subwoofer (see Subwoofer on page 60). 9. Remove the system board (see System board on page 64). Remove the fan: 1. Disconnect the fan cable from the system board, and then remove the piece of tape that secures the fan to the heat sink (1). 2. Remove the three Phillips screws securing the fan to the unit (2) and (3). 3. Lift the fan (4) to remove it. Reverse this procedure to install the fan. Component replacement procedures 77

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
Fan
Description
Spare part number
Fan (with foil)
763700-001
Before removing the fan, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
38
),
5.
Remove the optical drive (see
Optical drive
on page
39
).
6.
Remove the top cover from the base enclosure (see
Base enclosure
on page
42
).
7.
Remove the WLAN module (see
WLAN module
on page
56
).
8.
Remove the subwoofer (see
Subwoofer
on page
60
).
9.
Remove the system board (see
System board
on page
64
).
Remove the fan:
1.
Disconnect the fan cable from the system board, and then remove the piece of tape that secures the fan
to the heat sink
(1)
.
2.
Remove the three Phillips screws securing the fan to the unit
(2)
and
(3)
.
3.
Lift the fan
(4)
to remove it.
Reverse this procedure to install the fan.
Component replacement procedures
77