HP ENVY 17-3001xx HP ENVY 17 - Maintenance and Service Guide - Page 54
RTC battery
View all HP ENVY 17-3001xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
RTC battery Description RTC battery (includes cable) Spare part number 651948-001 Before removing the RTC battery, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Disconnect the battery cable from the system board (see Battery on page 39). Remove the RTC battery: 1. Disconnect the RTC battery cable (1) from the system board. 2. Remove the RTC battery (2). (The RTC battery is attached to the system board with doublesided tape.) Reverse this procedure to install the RTC battery. 46 Chapter 4 Removal and replacement procedures ENWW