HP ENVY 17-3001xx HP ENVY 17 - Maintenance and Service Guide - Page 58
Reverse this procedure to install the WLAN module., Removal and replacement procedures
View all HP ENVY 17-3001xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
3. Remove the WLAN module by pulling the module away from the slot at an angle. NOTE: If a WLAN antenna cable is not connected to a terminal on the WLAN module, a protective sleeve must be installed on the antenna connector, as shown in the following illustration. Reverse this procedure to install the WLAN module. 50 Chapter 4 Removal and replacement procedures ENWW
3.
Remove the WLAN module by pulling the module away from the slot at an angle.
NOTE:
If a WLAN antenna cable is not connected to a terminal on the WLAN module, a protective
sleeve must be installed on the antenna connector, as shown in the following illustration.
Reverse this procedure to install the WLAN module.
50
Chapter 4
Removal and replacement procedures
ENWW