HP ENVY 17-j092nr HP ENVY 17 Notebook PC HP ENVY TouchSmart m7 Notebook PC HP - Page 95
Fan
View all HP ENVY 17-j092nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
3. Release the clips (3), and then remove the power connector cable (4). Fan Reverse this procedure to install the power connector cable and bracket. Description Fan (with foil) Spare part number 720235-001 Before removing the fan: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 46). 5. Remove the display panel (see Display panel on page 59). 6. Remove the service cover (see Service cover on page 47). 7. Remove the hard drive (see Hard drive on page 48). 8. Remove the memory modules (see Memory modules on page 51). 9. Remove the WLAN module (see WLAN module on page 52). Component replacement procedures 85