HP ENVY 17-k011nr HP ENVY 17 Notebook PC HP ENVY 15 Notebook PC - Maintenance - Page 79
Speaker cable, Display cables
View all HP ENVY 17-k011nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Before removing the system board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 42), 5. Remove the optical drive (see Optical drive on page 43). 6. Remove the top cover from the base enclosure (see Base enclosure on page 46). 7. Remove the WLAN module (see WLAN module on page 59). 8. Remove the subwoofer (see Subwoofer on page 63). Remove the system board: 1. Remove the following cables if you have not already done so: ● Power connector board cable (1) ● Display cables (2), and (3) ● Speaker cable (4) 2. Disconnect the following cables if you have not already done so: ● Subwoofer cable (1) ● Optical drive cable (2) ● Hard drive cable (3) ● USB connector cable (4) Component replacement procedures 69