HP ENVY 17t-3000 HP ENVY 17 - Maintenance and Service Guide - Page 57
Remove the WLAN module, WLAN module tilts up.
View all HP ENVY 17t-3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Remove the WLAN module: 1. Disconnect the WLAN antenna cables from the terminals on the WLAN module. NOTE: The 1/black WLAN antenna cable is connected to the WLAN module 1/Main terminal. The 2/gray WLAN antenna cable is connected to the WLAN module 2/Aux terminal. If a third antenna cable is present, it is connected to the WLAN module middle terminal. 2. Remove the Phillips PM2.0×2.8 screw that secures the WLAN module to the system board. (The WLAN module tilts up.) ENWW Component replacement procedures 49
Remove the WLAN module:
1.
Disconnect the WLAN antenna cables from the terminals on the WLAN module.
NOTE:
The 1/black WLAN antenna cable is connected to the WLAN module 1/Main terminal.
The 2/gray WLAN antenna cable is connected to the WLAN module 2/Aux terminal. If a third
antenna cable is present, it is connected to the WLAN module middle terminal.
2.
Remove the Phillips PM2.0×2.8 screw that secures the WLAN module to the system board. (The
WLAN module tilts up.)
ENWW
Component replacement procedures
49