HP ENVY 750-400 Optical Drive Replacement Instructions - Page 1

Optical Drive Replacement Instructions 863071-001 Before you begin Observe the following requirements before removing and replacing the optical drive. Tools needed Phillips #2 screwdriver WARNING: Never open the cover while the power cord is attached. You might damage your computer or be injured by the spinning fan blades. Removing the optical drive 1. Press the power button to turn off the computer. WARNING: Avoid touching sharp edges inside the computer. CAUTION: Static electricity can damage the electronic components inside the computer. Discharge static electricity by touching the metal cage of the computer before touching any internal parts or electronic components. 2. Disconnect the power cord and all attached cables from the back of the computer. 3. To remove the access panel, loosen the captive Phillips screw (1), slide the access panel back, and then lift it off the computer (2). 4. Locate the optical drive: 1. Optical drive 2. Hard drive 3. Memory modules 863071-001 1