HP ENVY Sleekbook 4-1016nr HP Envy 4 - Maintenance and Service Guide - Page 42
Remove the base enclosure, use a thin, non-conductive tool such as the HP Tool
View all HP ENVY Sleekbook 4-1016nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Remove the base enclosure: 1. Turn the computer face down, remove the 12 Phillips PM 7.5 millimeter long screws. 2. Remove the bottom enclosure. NOTE: To remove the bottom enclosure, use a thin, non-conductive tool such as the HP Tool Shroud separator, available on the HP website. 34 Chapter 4 Removal and replacement procedures
Remove the base enclosure:
1.
Turn the computer face down, remove the 12 Phillips PM 7.5 millimeter long screws.
2.
Remove the bottom enclosure.
NOTE:
To remove the bottom enclosure, use a thin, non-conductive tool such as the HP Tool
Shroud separator, available on the HP website.
34
Chapter 4
Removal and replacement procedures