HP ENVY Sleekbook 4-1016nr HP Envy 4 - Maintenance and Service Guide - Page 54
Fan, Remove the base enclosure see
View all HP ENVY Sleekbook 4-1016nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
5. Lift up on the rear edge, slide backwards, and then remove the TouchPad button board and cable (4). Fan Reverse this procedure to install the TouchPad button board and cable. Description Fan (with foil) Spare part number 691641-001 Before removing the fan: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display panel on page 31). 5. Remove the base enclosure (see Base enclosure on page 33). 6. Remove the battery cable (see Battery on page 35). Remove the fan: 1. Disconnect the fan cable (1). 2. Remove the 2 Phillips PM screws securing the fan to the unit (2), and then lift the fan upwards (3). 46 Chapter 4 Removal and replacement procedures