HP ENVY Sleekbook 6-1168ca HP Envy 6 Maintenance and Service Guide - Page 66
USB/Audio board, Remove the security bracket see
View all HP ENVY Sleekbook 6-1168ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
2. Remove the security bracket (2). USB/Audio board Description USB/Audio board Spare part number 686597-001 Before removing the USB/Audio board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display panel on page 32). 5. Remove the base enclosure (see Base enclosure on page 34). 6. Disconnect the battery cable (see Battery on page 36). 7. Remove the subwoofer (see Subwoofer on page 56). 8. Remove the security bracket (see Security bracket on page 57). Remove the USB/Audio board: 1. Disconnect the USB/Audio board cable from the system board (1) 2. Disconnect the Phillips PM 2.0x2.0 screw securing the USB/Audio board (2). 58 Chapter 4 Removal and replacement procedures