HP ENVY TouchSmart 14-k112nr HP Envy 14 Sleekbook - Maintenance and Service Gu - Page 62
Card reader board
View all HP ENVY TouchSmart 14-k112nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
4. Lift the bracket (4) from atop the connector, and then lift the power connector and cable from the computer (5). Reverse this procedure to install the power connector and cable. Card reader board Description Card reader board Spare part number 728133-001 Before removing the card reader board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the service cover (see Service cover on page 37). 5. Remove the battery (see Battery on page 39). Remove the card reader board: 1. Remove the 2 Phillips PM2.0×2.0 screws that secure the card reader board to the system board (1). 2. Remove the Phillips PM2.5×3.5 screw that secures the card reader board to the computer (2). 54 Chapter 4 Removal and replacement procedures