HP ENVY TouchSmart 17-j100 HP ENVY 17 Notebook PC HP ENVY TouchSmart m7 Notebo - Page 82
Leap Motion module, Remove the display panel see
View all HP ENVY TouchSmart 17-j100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
9. Remove the optical drive (see Optical drive on page 46). 10. Remove the base enclosure (see Base enclosure on page 55). Remove the fingerprint reader board and cable: 1. Disconnect the cable (1) that secures the fingerprint reader to the top cover. 2. Release the top cover shield (2) and (3), and then remove the fingerprint reader board. Reverse this procedure to install the fingerprint reader board and cable. Leap Motion module Description Leap Motion module (includes cable) Spare part number 736480-001 Before removing the Leap Motion module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display panel on page 50). 5. Remove the service cover (see Service cover on page 40). 6. Remove the hard drive (see Hard drive on page 41). 7. Remove the memory modules (see Memory modules on page 43). 8. Remove the WLAN module (see WLAN module on page 44). 9. Remove the optical drive (see Optical drive on page 46). 72 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts