HP ENVY TouchSmart m7-j120dx HP ENVY 17 Notebook PC HP ENVY TouchSmart m7 Note - Page 84
Fan, Remove the power connector cable
View all HP ENVY TouchSmart m7-j120dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display panel on page 50). 5. Remove the service cover (see Service cover on page 40). 6. Remove the hard drive (see Hard drive on page 41). 7. Remove the memory modules (see Memory modules on page 43). 8. Remove the WLAN module (see WLAN module on page 44). 9. Remove the optical drive (see Optical drive on page 46). 10. Remove the base enclosure (see Base enclosure on page 55). Remove the power connector cable: 1. Release the metal clip to disconnect the power connector cable (1) from the system board. 2. Disengage the cable from the clips (2). 3. Release the clips (3), and then remove the power connector cable (4). Fan Reverse this procedure to install the power connector cable and bracket. Description Fan (with foil) Spare part number 720235-001 74 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts