HP ENVY dv6-7292nr HP ENVY dv6 Notebook PC Maintenance and Service Guide IMPOR - Page 64
Memory module, Spread the retaining tabs
View all HP ENVY dv6-7292nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Memory module Description 8-GB memory module (PC3, 12800, 1600-MHz) 4-GB memory module (PC3, 12800, 1600-MHz) 2-GB memory module (PC3, 12800, 1600-MHz) Spare part number 670034-001 641369-001 652972-001 Before removing the memory module, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 51). 5. Remove the service cover (see Hard drive on page 52). Remove the memory module: 1. Turn the system board upside down, with the front toward you. 2. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The memory module tilts up.) 3. Remove the memory module (2) by pulling it away from the slot at an angle. Reverse this procedure to install the memory module. 56 Chapter 4 Removal and replacement procedures