HP ENVY dv6-7292nr HP ENVY dv6 Notebook PC Maintenance and Service Guide IMPOR - Page 99
Subwoofer, Remove the USB board
View all HP ENVY dv6-7292nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Remove the USB board: 1. Disconnect the USB board cable (1) from the system board. 2. Remove the Phillips PM2.5×5.5 screw (2) that secures the USB board to the base enclosure. 3. Remove the USB board (3). Reverse this procedure to install the USB board. Subwoofer Description Subwoofer (includes subwoofer cable, top speakers passthrough cable, and 2 rubber isolators) Spare part number 682097-001 Before removing the subwoofer, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 51), and then remove the following components: a. Hard drive (see Hard drive on page 52) b. Optical drive (see Optical drive on page 59) c. Keyboard (see Keyboard on page 61) Component replacement procedures 91