HP ENVY m6-ar000 Maintenance and Service Guide - Page 37

Battery, Release the battery cable from the retention clip

Get HP ENVY m6-ar000 PDF manuals and user guides View all HP ENVY m6-ar000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Battery Description 4-cell, 55-Wh, 3.62-Ah, Li-ion battery (includes cable) Spare part number 844204-855 Before removing the battery, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Bottom cover on page 27). Remove the battery: 1. Disconnect the battery cable (1) from the system board. 2. Release the battery cable from the retention clip (2) built into the keyboard/top cover. 3. Remove the six Phillips M2.0×4.6 screws (3) that secure the battery to the keyboard/top cover. 4. Remove the battery (4). Reverse this procedure to install the battery. Component replacement procedures 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Battery
Description
Spare part number
4-cell, 55-Wh, 3.62-Ah, Li-ion battery (includes cable)
844204-855
Before removing the battery, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Bottom cover
on page
27
).
Remove the battery:
1.
Disconnect the battery cable
(1)
from the system board.
2.
Release the battery cable from the retention clip
(2)
built into the keyboard/top cover.
3.
Remove the six Phillips M2.0×4.6 screws
(3)
that secure the battery to the keyboard/top cover.
4.
Remove the battery
(4)
.
Reverse this procedure to install the battery.
Component replacement procedures
29