HP ENVY m6-k010dx HP ENVY m6 Sleekbook HP ENVY Touchsmart m6 SleekBook HP ENVY - Page 61
Right speaker, Remove the Phillips PM2.5×3.5 screw
View all HP ENVY m6-k010dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Reverse this procedure to install the power button board. Right speaker Description Speaker Kit (includes left speaker/subwoofer and right speaker) Spare part number 725460-001 The computer includes two separate speakers - a speaker on the right side, and a speaker/subwoofer on the left side. You must remove the system board to remove the right speaker. You do not have to remove the system board to remove the left speaker/subwoofer. You do have to remove the RJ-45 module cover to remove the left speaker/subwoofer. Before removing the front speakers, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the service cover (see Service cover on page 30). 5. Remove the battery (see Battery on page 32), 6. Remove the fan (see Fan on page 45). 7. Remove the card reader board (see Card reader board on page 44). 8. Remove the system board (see System board on page 47). Remove the speakers: 1. Remove the Phillips PM2.5×3.5 screw (1) and the Phillips PM2.5×5.5 screw (2) that secures the right hinge to the computer. Component replacement procedures 53