HP ENVY m7-k100 ENVY 17 Notebook PC ENVY 15 Notebook PC ENVY m7 Notebook PC Ma - Page 84
To prevent damage to the memory module, hold it by the edges only. Do not touch
View all HP ENVY m7-k100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 42), 5. Remove the optical drive (see Optical drive on page 43). 6. Remove the top cover from the base enclosure (see Base enclosure on page 46). 7. Remove the WLAN module (see WLAN module on page 59). 8. Remove the subwoofer (see Subwoofer on page 63). 9. Remove the system board (see System board on page 67). Remove the memory module: 1. Turn the system board over. 2. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The memory module tilts up.) CAUTION: To prevent damage to the memory module, hold it by the edges only. Do not touch the components on the memory module. 3. Slide the memory module forward (2) to remove it. Reverse this procedure to install a memory module. 74 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts