HP ENVY m7-k200 Maintenance and Service Guide - Page 84
Fan, Remove the fan
View all HP ENVY m7-k200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Fan Description Fan (with foil) Spare part number 763700-001 Before removing the fan, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37), 5. Remove the optical drive (see Optical drive on page 38). 6. Remove the top cover from the base enclosure (see Base enclosure on page 41). 7. Remove the WLAN module (see WLAN module on page 55). 8. Remove the subwoofer (see Subwoofer on page 60). 9. Remove the system board (see System board on page 63). Remove the fan: 1. Disconnect the fan cable from the system board, and then remove the piece of tape that secures the fan to the heat sink (1). 2. Remove the three Phillips screws securing the fan to the unit (2) and (3). 3. Lift the fan (4) to remove it. Reverse this procedure to install the fan. 74 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts