HP ENVY x360 Maintenance and Service Guide - Page 42
Solid-state drive, Remove the bottom cover see
View all HP ENVY x360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Solid-state drive Description For use only on computer models with model numbers 15m-bq1xx and 15-bq1xx: 512-GB, 2280 PCIe, SS, NVMe 256-GB, 2280 PCIe, SS, NVMe For use only on computer models with model numbers 15m-bq1xx and 15-bq1xx: 1-TB, 2280 M.2, PCIe3×4, SS, NVMe with TLC 512-GB, 2280 M.2, PCIe3×4, SS, NVMe with TLC 360-GB, 2280 M.2, PCIe3×4, SS, NVMe with TLC 256-GB, 2280 M.2, PCIe3×4, SS, NVMe with TLC 256-GB, 2280 M.2, SATA-3, with TLC 128-GB, 2280 M.2, SATA-3 Spare part number L01301-002 L01300-002 908359-003 847110-015 917818-002 847109-018 759848-028 827560-038 Before removing the solid-state drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 29). 5. Remove the battery (see Battery on page 31). Remove the solid-state drive: 1. Remove the Phillips PM2.0×2.4 broad head screw (1) that secures the solid-state drive to the system board. 34 Chapter 5 Removal and replacement procedures