HP ENVY x360 Maintenance and Service Guide - Page 68
Power connector cable, Battery see
View all HP ENVY x360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Power connector cable Description Power connector cable Spare part number 933523-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 29), and then remove the following components: a. Battery (see Battery on page 31) b. System board (see System board on page 42) c. Speakers (see Speakers on page 49) d. Display assembly (see Display assembly on page 51) Remove the power connector cable: ▲ Remove the power connector cable. Reverse this procedure to install the power connector cable. 60 Chapter 5 Removal and replacement procedures