HP EVA4000/6000/8000 HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array u - Page 50
Initializing, rmware code load, Storage system updating, rmware
View all HP EVA4000/6000/8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
9. Click Finish. The following confirmation message opens. 10. Click OK to upgrade the system software on the controllers. Click Cancel to stop the code load process and return to the Storage System Properties window. The upgrade process begins and the Initializing firmware code load page opens. See Figure 16. This page is displayed until the controller code load is complete and the controllers restart. During this interval both controllers resync and begin operating on the new firmware code. Once the resync is complete, the controllers begin processing host I/Os. Next, code within the storage system is updated, which can take up to 10 minutes to complete. This includes firmware on the EMU and I/O modules in the disk enclosures. During this interval, the Storage System Updating Firmware window opens. See Figure 17. Figure 16 Initializing firmware code load Figure 17 Storage system updating firmware 11. When the firmware upgrade is complete, the Initialized Storage System Properties window opens. Verify the version of the storage system software in the Version box. It should be 6200. 50 Upgrading the Enterprise Virtual Array