HP EliteDesk 800 G5 Hardware Reference Guide - Page 38
Removing a 2.5-inch hard drive, Rotate the drive cage to its upright position.
![]() |
View all HP EliteDesk 800 G5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Removing a 2.5-inch hard drive 1. Prepare the computer for disassembly. See Preparing for disassembly on page 4. 2. If the computer is on a stand, remove the computer from the stand. 3. Remove the computer access panel. See Removing the computer access panel on page 5. 4. Remove the front bezel. 5. Rotate the drive cage to its upright position. 6. Disconnect the power cable (1) and data cable (2) from the rear of the hard drive. 32 Chapter 2 Hardware upgrades
![](/manual_guide/products/hewlettpackard-elitedesk-800-g4-hardware-reference-guide-9346da3/38.png)
Removing a 2.5-inch hard drive
1.
Prepare the computer for disassembly. See
Preparing for disassembly
on page
4
.
2.
If the computer is on a stand, remove the computer from the stand.
3.
Remove the computer access panel. See
Removing the computer access panel
on page
5
.
4.
Remove the front bezel.
5.
Rotate the drive cage to its upright position.
6.
Disconnect the power cable (1) and data cable (2) from the rear of the hard drive.
32
Chapter 2
Hardware upgrades