HP EliteDesk 800 G5 Hardware Reference Guide - Page 44
with the screw 3., card at approximately a 30° angle 1. Press the other end of the card down 2
![]() |
View all HP EliteDesk 800 G5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
6. To remove an M.2 SSD card, remove the screw that secures the card (1), lift the end of the card up (2), and then slide the card out of the system board connector (3). 7. To install an M.2 SSD card, slide the pins on the card into the system board connector while holding the card at approximately a 30° angle (1). Press the other end of the card down (2), and then secure the card with the screw (3). 38 Chapter 2 Hardware upgrades
![](/manual_guide/products/hewlettpackard-elitedesk-800-g4-hardware-reference-guide-9346da3/44.png)
6.
To remove an M.2 SSD card, remove the screw that secures the card (1), lift the end of the card up (2),
and then slide the card out of the system board connector (3).
7.
To install an M.2 SSD card, slide the pins on the card into the system board connector while holding the
card at approximately a 30° angle (1). Press the other end of the card down (2), and then secure the card
with the screw (3).
38
Chapter 2
Hardware upgrades