HP En3700 HP Jetdirect Administrator's Guide - Page 247

Table B.1 HP Jetdirect Classic Control Panel Menu (2 of 3) Menu Item CFG TCP/IP= CFG IPX/SPX= Description Selects whether you want to access the TCP/IP menu and set TCP/IP protocol parameters. NO (default): Bypass the TCP/IP menu items. YES: Access the TCP/IP menu items. ● BOOTP=YES* enables configuration by a BootP Server. ● DHCP=YES* enables configuration by a DHCP Server. If DHCP=YES* and the print server has a DHCP lease, you can choose to configure the following DHCP settings: ■ RELEASE: Choose YES to release, or NO to save, the current DHCP lease. ■ RENEW: Choose YES to renew the current DHCP lease, or NO to not renew the DHCP lease. ● AUTO IP=YES* will automatically assign a link-local address in the form 169.254.x.x. If you specify BOOTP=NO*, DHCP=NO* and AUTO IP=NO*, you can manually set the following TCP/IP parameters from the control panel: ■ Each byte of the IP address (IP) ■ Subnet Mask (SM) ■ Syslog Server (LG) ■ Default Gateway (GW) ■ Idle Timeout period (default is 270 seconds, 0 disables the timeout) ● CFG DNS 1=YES* will allow you to specify the IP address of a primary DNS server, one byte at a time. ● CFG DNS 2=YES* will allow you to specify the IP address of a secondary DNS server, one byte at a time. Print a Jetdirect configuration page to verify your settings. However, note that the print server may overwrite selected parameters with values that ensure proper operation. Selects whether you want to access the IPX/SPX menu and set IPX/SPX protocol parameters. NO (default): Bypass the IPX/SPX menu items. YES: Access the IPX/SPX menu items. In the IPX/SPX menu, you can specify the Frame Type parameter used on your network. ■ AUTO (default) will automatically set and limit the frame type to the first one detected. ■ For Ethernet cards, frame type selections include EN_8023, EN_II, EN_8022, EN_SNAP. ENWW The HP Jetdirect EIO Control Panel Menu 247