HP Envy 13-1030nr HP ENVY 13 - Maintenance and Service Guide - Page 37
Top cover, Three Phillips PM2.0×6.0 screws
View all HP Envy 13-1030nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Removal and replacement procedures Top cover Description Top cover (includes TouchPad board, TouchPad bracket, and TouchPad cable) Spare part number 538343-001 Before removing the top cover, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-7). Remove the top cover: 1. Remove the following components: ❏ Three rubber feet 1 ❏ Three Phillips PM2.0×6.0 screws 2 ❏ Six Phillips PM2.0×3.0 screws 3 2. Turn the computer right-side up, with the front toward you. 4-8 Maintenance and Service Guide
4–8
Maintenance and Service Guide
Removal and replacement procedures
Top cover
Before removing the top cover, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
“Battery” on page 4-7
).
Remove the top cover:
1. Remove the following components:
❏
Three rubber feet
1
❏
Three Phillips PM2.0×6.0 screws
2
❏
Six Phillips PM2.0×3.0 screws
3
2. Turn the computer right-side up, with the front toward you.
Description
Spare part number
Top cover (includes TouchPad board, TouchPad bracket, and TouchPad cable)
538343-001