HP Envy 13-1030nr HP ENVY 13 - Maintenance and Service Guide - Page 41

Digital Media Slot board, Disconnect the Digital Media Slot board cable

Get HP Envy 13-1030nr PDF manuals and user guides View all HP Envy 13-1030nr manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Removal and replacement procedures Digital Media Slot board Description Digital Media Slot board (includes cable) Spare part number 538337-001 Before removing the Digital Media Slot board, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-7). 5. Remove the top cover (see "Top cover" on page 4-8). Remove the Digital Media Slot board: 1. Disconnect the Digital Media Slot board cable 1 from the system board. 2. Remove the Digital Media Slot board cable from the clip 2 built into the power connector bracket. 3. Remove the three Phillips PM2.0×4.0 screws 3 that secure the Digital Media Slot board to the base enclosure. 4. Release the Digital Media Slot board by lifting the front edge 4 of the board until it rests at an angle. 5. Remove the Digital Media Slot board 5 by sliding it away from the computer at an angle. Reverse this procedure to install the Digital Media Slot board. 4-12 Maintenance and Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
4–12
Maintenance and Service Guide
Removal and replacement procedures
Digital Media Slot board
Before removing the Digital Media Slot board, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
“Battery” on page 4-7
).
5. Remove the top cover (see
“Top cover” on page 4-8
).
Remove the Digital Media Slot board:
1. Disconnect the Digital Media Slot board cable
1
from the system board.
2. Remove the Digital Media Slot board cable from the clip
2
built into the power connector bracket.
3. Remove the three Phillips PM2.0×4.0 screws
3
that secure the Digital Media Slot board to the base enclosure.
4. Release the Digital Media Slot board by lifting the front edge
4
of the board until it rests at an angle.
5. Remove the Digital Media Slot board
5
by sliding it away from the computer at an angle.
Reverse this procedure to install the Digital Media Slot board.
Description
Spare part number
Digital Media Slot board (includes cable)
538337-001