HP Evo D500 Computer Set Up Guide Evo Desktop Family, Evo Workstation Family, - Page 12

Computer Setup Computer Setup (Continued) Heading Option Description Storage (continued) Options (continued) Primary IDE Controller Allows you to enable or disable the primary IDE controller. Secondary IDE Controller Allows you to enable or disable the secondary IDE controller. Diskette MBR Validation Allows you to enable or disable strict validation of the diskette Master Boot Record (MBR). ✎ If you use a bootable diskette image that you know to be valid, and it does not boot with Diskette MBR Validation enabled, you may need to disable this option in order to use the diskette. IDE DPS Self-Test Allows you to execute self-tests on IDE hard drives capable of performing the Drive Protection System (DPS) self-tests. ✎ This selection will only appear when at least one drive capable of performing the IDE DPS self-tests is attached to the system. Controller Order (This feature is supported on select models only.) Allows you to specify the order of attached hard drive controllers. The first hard drive controller in the order will have priority in the boot sequence and will be recognized as drive C (if any devices are attached). ✎ This selection will not appear if all of the hard drives are attached to the embedded IDE controllers. Support for Computer Setup options may vary depending on your specific hardware configuration. Computer Setup Guide 9