HP Evo D500 Computer Set Up Guide Evo Desktop Family, Evo Workstation Family, - Page 4
Computer Setup, Computer Setup Utilities (F10) - memory
View all HP Evo D500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Computer Setup Computer Setup Utilities (F10) Use Computer Setup to do the following: I Change factory default settings. I Set the system date and time. I Set, view, change, or verify the system configuration, including settings for processor, graphics, memory, audio, storage, communications, and input devices. I Modify the boot order of bootable devices such as hard drives, diskette drives, CD-ROM drives, DVD-ROM drives, or LS-120 drives. I Configure the boot priority of IDE and SCSI hard drives controllers. I Configure Quiet Drive options (for drives that support this feature). I Enable Quick Boot, which is faster than Full Boot but does not run all of the diagnostic tests run during a Full Boot. You can set your system to: ❏ always Quick Boot (default); ❏ periodically Full Boot (from every 1 to 30 days); or ❏ always Full Boot. I Enable or disable Network Server Mode, which allows the computer to boot the operating system when the power-on password is enabled, with or without a keyboard or mouse attached. When attached to the system, the keyboard and mouse remain locked until the power-on password is entered. Computer Setup Guide 1