HP Evo Workstation w4000 Evo Workstation W4000 CMT Hardware Reference Guide - Page 35
adapter when it snaps into place., The primary 3.5-inch diskette drive should only be installed into
View all HP Evo Workstation w4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Hardware Upgrades 7. Install two guide screws on each side of the adapter 1. 8. Install the adapter in the desired drive bay 2 by sliding it into the front of the drive cage; the drivelock automatically secures the adapter when it snaps into place. ✎ The primary 3.5-inch diskette drive should only be installed into bay 3. Bay 3 is the topmost bay in the desktop configuration. Aligning the Guide Screws and Installing an Adapter with a 3.5-Inch Drive on a Minitower (top) and a Desktop (bottom) 2-18 Hardware Reference Guide
2–18
Hardware Reference Guide
Hardware Upgrades
7. Install two guide screws on each side of the adapter
1
.
8. Install the adapter in the desired drive bay
2
by sliding it into the
front of the drive cage; the drivelock automatically secures the
adapter when it snaps into place.
✎
The primary 3.5-inch diskette drive should only be installed into
bay 3. Bay 3 is the topmost bay in the desktop configuration.
Aligning the Guide Screws and Installing an Adapter with a
3.5-Inch Drive on a Minitower (top) and a Desktop (bottom)