HP Evo n150 Compaq Evo Notebook N150 Series - Page 48
Connecting the Optional External Diskette Drive
View all HP Evo n150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Drives Removing a Media Bay drive 5. Slide the new drive into the Media Bay until it clicks into place. 6. Turn the computer top side up and open the display. If running Windows 98 or Windows Me, turn on the computer. 7. To remove the drive, repeat the steps above. Connecting the Optional External Diskette Drive ✎ The computer supports only one diskette drive at a time. If a diskette drive is used in the Media Bay, do not connect an external diskette drive to the computer. 1. If the diskette drive and its drive bay are not assembled, attach the two pieces by sliding the drive into the drive bay. 2. Attach the drive cable to the parallel port on the rear of the computer. 5-4 Hardware Guide
5–4
Hardware Guide
Drives
Removing a Media Bay drive
5.
Slide the new drive into the Media Bay until it clicks into
place.
6.
Turn the computer top side up and open the display. If
running Windows 98 or Windows Me, turn on the computer.
7.
To remove the drive, repeat the steps above.
Connecting the Optional
External Diskette Drive
The computer supports only one diskette drive at a time. If a
diskette drive is used in the Media Bay, do not connect an external
diskette drive to the computer.
1.
If the diskette drive and its drive bay are not assembled,
attach the two pieces by sliding the drive into the drive bay.
2.
Attach the drive cable to the parallel port on the rear of the
computer.