HP Evo n400c Compaq Evo Notebook N400c Hardware Guide - Page 59
Enabling Bootable Media and Devices for MultiBoot, Any internal NIC
View all HP Evo n400c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Drives Some devices must be enabled in Computer Setup before they can be included in a MultiBoot sequence. Enabling Bootable Media and Devices for MultiBoot The computer can start by default from the following media and devices: s Any bootable hard drive s Any bootable diskette in the external diskette drive s Any bootable diskette (but not a SuperDisk LS-120 or ZIP disk) in an optional docking base s Any bootable peripheral interconnect (PCI) NIC in an optional docking base The computer can start from the following media and devices only if the devices are enabled for inclusion in MultiBoot: s Any bootable diskette or CD in an optional diskette drive or CD drive connected by USB to the computer or to an optional docking base s Any internal NIC To enable bootable media in USB drives or an internal NIC for inclusion in MultiBoot: 1. Turn on or restart the computer, then press F10 while the F10 = ROM Based Setup message is displayed in the lower-left corner of the screen. ❏ To change the language, press F2. ❏ For navigation instructions, press F1. Hardware Guide 5-7