HP Evo n600c Hardware Guide Evo Notebook N600c Series - Page 45
Using Numeric Keypad Keys as Standard Keys, Enabling the Numeric Keypad at Startup
View all HP Evo n600c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Pointing Devices and Keyboard Using Numeric Keypad Keys as Standard Keys To use the numeric keypad keys temporarily as standard keys while the numeric keypad is enabled: I Press and hold Fn to type in lowercase. I Press and hold Fn+shift to type in uppercase. When the Fn key is released, the numeric keypad functions return. Enabling the Numeric Keypad at Startup By default the computer starts up with the numeric keypad disabled. You can set the computer to start up with the numeric keypad enabled. The numeric keypad can be enabled or disabled with Fn+num lk in either startup state. To set the computer to start up with the numeric keypad enabled: 1. Turn on or restart the computer. Press F10 while the F10 = ROM Based Setup message is displayed in the lower left corner of the screen. ❏ To change the language, press F2. ❏ For navigation instructions, press F1. 2. Select Advanced > Device Options, then press enter. 3. Toggle on the Num Lock State at Boot field, then press F10. 4. To save your preference and exit Computer Setup, select File > Save Changes and Exit, then follow the instructions on the screen. To disable the numeric keypad at startup, repeat the above procedure, toggling off the Num Lock State at Boot field. Hardware Guide 3-15