HP Evo n600c Hardware Guide Evo Notebook N600c Series - Page 75
External Device Connections, Connecting a Standard Device
View all HP Evo n600c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
7 External Device Connections Connecting a Standard Device The jacks and connectors described in this guide support the standard external devices that specify them. I For information about which jack or connector to use, refer to the documentation included with the device. I For information about installing or loading any software such as drivers required by the device, refer to the device documentation, your operating system documentation, or the device manufacturer's Web site. I To connect both a pointing device and a keyboard to the keyboard/pointing device (PS/2) connector, use a Y-adapter. A Y-adapter can be purchased from most computer or electronics retailers. To connect a standard external device to the computer: 1. If you are connecting a powered device, be sure the device is turned off. 2. Connect the device to a jack or connector on the computer. 3. If you are connecting a powered device, plug the device power cord into a grounded electrical outlet. 4. Turn on the device. ✎ If a properly connected external monitor does not display an image, try pressing the Fn+F4 hotkeys to switch the image to the monitor. Hardware Guide 7-1