HP G42t-300 Compaq Presario CQ42 Notebook PC and HP G42 Notebook PC - Maintena - Page 103
The thermal material must be thoroughly cleaned from the surface of the fan/heat sink assembly
View all HP G42t-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
The thermal material must be thoroughly cleaned from the surface of the fan/heat sink assembly (1) and (3), and the processor component (2), each time the fan/heat sink assembly is removed. Thermal pads and thermal paste must be installed on all surfaces before the fan/heat sink assembly is reinstalled. The following illustration shows the locations for thermal material on systems with UMA graphics subsystems. Reverse this procedure to install the fan/heat sink assembly. ENWW Component replacement procedures 93
The thermal material must be thoroughly cleaned from the surface of the fan/heat sink assembly
(1)
and
(3)
, and the processor component
(2)
, each time the fan/heat sink assembly is removed. Thermal
pads and thermal paste must be installed on all surfaces before the fan/heat sink assembly is
reinstalled.
The following illustration shows the locations for thermal material on systems with UMA graphics
subsystems.
Reverse this procedure to install the fan/heat sink assembly.
ENWW
Component replacement procedures
93