HP G42t-300 Compaq Presario CQ42 Notebook PC and HP G42 Notebook PC - Maintena - Page 74
from the system board., Remove the keyboard.
View all HP G42t-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
5. Release the top edge of the keyboard by lifting it up to disengage the keyboard from the tabs on the top cover (1). 6. Slide the top edge of the keyboard back (2) until it rests against the display. 7. Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached and disconnect the keyboard cable (2) from the system board. 8. Remove the keyboard. Reverse this procedure to install the keyboard. 64 Chapter 4 Removal and replacement procedures ENWW
5.
Release the top edge of the keyboard by lifting it up to disengage the keyboard from the tabs on
the top cover
(1)
.
6.
Slide the top edge of the keyboard back
(2)
until it rests against the display.
7.
Release the zero insertion force (ZIF) connector
(1)
to which the keyboard cable is attached and
disconnect the keyboard cable
(2)
from the system board.
8.
Remove the keyboard.
Reverse this procedure to install the keyboard.
64
Chapter 4
Removal and replacement procedures
ENWW