HP G60-101CA Service Guide - Page 53
RTC battery, Remove the hard drive cover see
View all HP G60-101CA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
RTC battery ✎ Removing the RTC battery and leaving it uninstalled for 5 or more minutes causes all passwords and CMOS settings to be cleared. Description RTC battery Spare part number 501587-001 Before removing the RTC battery, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-7). 5. Remove the hard drive cover (see "Hard drive" on page 4-10). Remove the RTC battery: 1. Disconnect the RTC battery cable 1 from the system board. 2. Remove the RTC battery 2 from the clip built into the base enclosure. The RTC battery is attached to the system board with double-sided tape. Reverse this procedure to install the RTC battery. Removal and replacement procedures 4-12