HP G60-101CA Service Guide - Page 55
Memory modules are designed with a notch, to prevent incorrect insertion into the memory module slot.
View all HP G60-101CA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
3. Spread the retaining tabs 1 on each side of the memory module slot to release the memory module. (The edge of the module opposite the slot rises away from the computer.) 4. Remove the memory module 2 by pulling the module away from the slot at an angle. ✎ Memory modules are designed with a notch 3 to prevent incorrect insertion into the memory module slot. Reverse this procedure to install a memory module. Removal and replacement procedures 4-14
Removal and replacement procedures
4–14
3. Spread the retaining tabs
1
on each side of the memory module slot to release the memory module. (The edge
of the module opposite the slot rises away from the computer.)
4. Remove the memory module
2
by pulling the module away from the slot at an angle.
✎
Memory modules are designed with a notch
3
to prevent incorrect insertion into the memory module slot.
Reverse this procedure to install a memory module.